VER SALES, INC.
Assorted Hooks
Sliding Choker Hooks
- Forged alloy steel through 3/4"
- Cast alloy steel 7/8" through 1-1/2"
- Wide throat to take heavy thimbles
| Single Part Rope Size | Eight Part Rope Size | Safe Working Load* (Pounds) |
Dimensions in Inches | Weight in Pounds Each | |||
| A | C | E | L | ||||
| 3/8 | - | 2,500 | 2-1/16 | 5/8 | 5/8 | 4-9/32 | .88 |
| 1/2 | 1/8 | 3,300 | 2-1/4 | 3/4 | 25/32 | 4-31/32 | 1.25 |
| †5/8 | 3/16 | 5,000 | 3-1/16 | 3/4 or 1 | 15-16 | 6-3/8 | 2.93 |
| †3/4 | 1/4 | 8,000 | 3-1/8 | 1 or 1-7/16 | 1-5/32 | 7-21/32 | 5.17 |
| †7/8 - 1 | 3/8 | 15,000 | 4-1/2 | 1-1/4 or 2 | 1-5/8 | 9-1/2 | 16.5 |
| †1-1/8 - 1-1/4 | 7/16 | 23,000 | 5-5/8 | 2-5/16 | 1-3/4 | 11-5/8 | 26.5 |
| †1-3/8 - 1-1/2 | 1/2 - 9/16 | 30,000 | 7 | 2-13/16 | 2-3/16 | 14-1/2 | 42.00 |
|
* Ultimate Load is 5 Times Safe Working Load.
When Ordering, Eye diameter ("C") Should Be Specified. |
|||||||
Snap Hooks
- Pressed steel latches and stainless steel springs, bolts and nuts.
- Safe working loads shown are based on ultimate load that is 4 times the safe working load.
| Hook Size (Inches) | Safe Working Load (Pounds) | Inside Diameter of Eye (Inches) | Throat Opening (Inches) | Length Overall (Inches) | Weight in Pounds Per 100 |
| 7/16 | 750 | 3/4 | 3/4 | 3-15/16 | 23.25 |
| 9/16 | 1,000 | 1-1/8 | 13-16 | 4-3/4 | 48.25 |
Replacement Hook
- Easily attached to any hoist with welded link load chain and roller chain or wire rope with suitable end fitting
- Spring latch, latch bolt with self locking nut - stainless steel. Nuts cadmium plated brass.
- For chain and electric hoists with swivel jaw-forged.
| Size Hoist | Width Between Jaws (Inches) | Diameter Bolt (Inches) | Overall Length (Inches) | Throat Opening (Inches) | Weight in Pounds Each |
| 1/2 Ton | 9/16 | 3/8 | 6-1/8 | 31/32 | 1.36 |
| 1 Ton | 11/16 | 7/16 | 7-11/16 | 1-1/8 | 2.55 |
Sorting Hook
- Deep straight throat permits efficient handling of flat plates of large cylindrical shapes.
- The long tapered point allows easy grab in rings, pear links, eye bolts of lifting holes.
- Ultimate load is 5 times the safe working load.
| Safe Working Load at Tip | Safe Working Load at Bottom of Hook | Overall Length | I.D. of Eye | Opening at Top of Hook | Radius at Bottom of Hook | Weight Pounds Each |
| 2 Ton | 7-1/2 Ton | 9-11/16" | 1-3/8" | 2-13/16" | 5/8" | 6 |
Pedro or Sling Hook
Inside of Eye: 3/4" or 1"
Outside Diameter of eye: 2-1/2". Throat of Hook: 7/8"
Thickness of Hook: 1"
Overall Length: 5-3/4"
Weight Each: 2-1/2 lbs.
| Inside Diameter of Eye (Inches) | Ultimate Load (Tons) |
| 3/4 | 10 |
| 1 | 10 |
|
Note: Pedro hooks are furnished in two sizes 3/4" and 1" inside diameter.
When ordering specify the size required |
|
Barrel Hooks
| Forged Galvanized or Self Colored | |||||
| I.D. of Eye | O.D. of Eye | Overall Length | Width of Lip | Weight Per Pair | Safe Working Load |
| 1-9/16" | 2-13/16" | 5" | 2-7/8" | 3-1/4 lbs. | 1 Ton |